User Rating 0.0
Total Usage 0 times
⚠ SAFETY WARNING: Verify units. 1 Gram = 15.4 Grains. Do not confuse 'g' and 'gr'.
0.0000
Quick Check:
Is this tool helpful?

Your feedback helps us improve.

About

In the precision sports of archery and shooting, as well as gemology, weight measurement is critical. While the Metric system (grams) is the global standard, ballistics and projectile weights in the US and UK are almost exclusively measured in "Grains" (gr). A grain is a tiny unit of mass based historically on the weight of a barley seed.

This converter bridges the gap with extreme precision. Confusion between grams and grains can be catastrophic in reloading ammunition; a load measured in grams instead of grains could be 15 times overcharged. This tool emphasizes safety with a clear, distinct UI and high-precision decimal support (up to 4 places), ensuring enthusiasts can verify their load data or arrow weights with confidence.

ballistics reloading archery grams grains weight conversion

Formulas

The Grain is defined as exactly 64.79891 milligrams. Therefore, the conversion factor from Grams to Grains is derived as:

1 g 15.432358 gr

The conversion formula used in this tool is:

Weightgr = Weightg × 15.432358

Warning: Always cross-reference multiple data sources when reloading.

Reference Data

Common ProjectileWeight (Grains gr)Weight (Grams g)Caliber Class
Light Target553.564.223 / 5.56
Standard 9mm1157.4529mm Luger
Heavy 9mm1479.5259mm Subsonic
Standard Rifle1509.720.308 Win
Heavy Rifle18011.664.30-06 / .308
Magnum Rifle20012.960.300 Win Mag
Heavy Pistol23014.904.45 ACP
Archery Point1006.480Field Point
Archery Point1258.100Broadhead

Frequently Asked Questions

"g" stands for Grams (Metric). "gr" stands for Grains (Imperial). 1 gram is roughly 15.4 grains. Confusing them is dangerous.
It is a historical unit that provides a fine level of integer precision for small weights like powder charges and bullets without needing decimals.
It uses the standard conversion factor of 15.4323583529 and outputs up to 4 decimal places for high-precision validation.
This tool is for calculation verification only. Always use a calibrated scale for physical measurement of energetic materials.